T7 Triple Vane Pumps: T7DBB to T7EEC, Six Builds from Four Cartridge Groups

The T7 triples put three sections on one shaft, and the range offers six builds: T7DBB, T7DCB, T7DCC, T7DDB, T7EDB and T7EEC. They draw on four cartridge groups, combined in different ways, and each build is available in two versions: the plain model on an ISO mounting flange and the same model with an S on an SAE flange.

Two of the six read one group at the front and share a second group across the two rear positions; the rest read three different groups. That is what decides which tables apply to a given string.

The six builds

Model Sections ISO version flange SAE version flange Weight
T7DBB / T7DBBS D + B + B 125-A2-HW or 125-B4-HW, 6 bolts SAE C, 6 bolts 61 kg
T7DCB / T7DCBS D + C + B 125-A2-HW or 125-B4-HW, 6 bolts SAE C, 6 bolts 61 kg
T7DCC / T7DCCS D + C + C 125-A2-HW or 125-B4-HW, 6 bolts SAE C, 6 bolts 61 kg
T7DDB / T7DDBS D + D + B 125-A2-HW or 125-B4-HW, 6 bolts SAE C, 6 bolts 66 kg
T7EDB / T7EDBS E + D + B 250-B4-HW, 4 bolts SAE E, 4 bolts 102 kg
T7EEC / T7EECS E + E + C 250-B4-HW, 4 bolts SAE E, 4 bolts 114.8 kg

Which group each position reads

Model Front P1 Middle P2 Rear P3
T7DBB D group B group, shared with P3 B group, shared with P2
T7DCB D group C group B group
T7DCC D group C group, shared with P3 C group, shared with P2
T7DDB D group, shared with P2 D group, shared with P1 B group
T7EDB E group D group B group
T7EEC E group, shared with P2 E group, shared with P1 C group

The D and B group lists

Displacements are in ml/rev. The D group is the twelve-code list used at the front position of the four D builds and at both front positions of the T7DDB; the B group is the thirteen-code list used at the rear of the three B builds.

D code ml/rev B code ml/rev
B14 44.0 B02 5.8
B17 55.0 B03 9.8
B20 66.0 B04 12.8
B22 70.3 B05 15.9
B24 81.1 B06 19.8
B28 90.0 B07 22.5
B31 99.2 B08 24.9
B35 113.4 B09 28.0
B38 120.6 B10 31.8
B42 137.5 B11 35.0
B45 145.7 B12 41.0
B50 158.0 B14 45.0
B15 50.0

The C and E group lists

The C group covers the middle position of the T7DCB, both rear positions of the T7DCC and the rear of the T7EEC. The E group is the ten-code list at the front of the T7EDB and across the two front positions of the T7EEC.

C code ml/rev E code ml/rev
B03 10.8 042 132.3
B05 17.2 045 142.4
B06 21.3 050 158.5
B08 26.4 052 164.8
B10 34.1 054 171.0
B12 37.1 057 183.3
B14 46.0 062 196.7
B17 58.3 066 213.3
B20 63.8 072 227.1
B22 70.3 085 268.7
B25 79.3
B28 88.8
B31 100.0

The string, field by field

The T7DDB example reads T7DDB or T7DDBS - B50 - B22 - B12 - 1 R 00 - A 1 - M0 - ... The four D builds and the two E builds share the same field order.

Field Function Values
1 Series and flange Six models; S added for the SAE flange version
2 Front cartridge P1 D group on the four D builds, E group on the two E builds
3 Middle cartridge P2 Per the table above; some builds share it with P1 or P3
4 Rear cartridge P3 Per the table above
5 Shaft Depends on the version; see the shaft table
6 Rotation, seen from the shaft end R clockwise, L counter-clockwise
7 Porting combination 00 is standard
8 Design letter A across the six builds
9 Seal class 1, 4 or 5
10 Port form and thread Sizes fixed per model; the rear size is chosen here
11 Modification Left blank on standard builds

Shaft codes: where the S version differs

Model SAE version Codes shared by both versions
T7DBB / T7DCB / T7DCC 1 keyed outside SAE, 2 keyed SAE CC, 3 splined 12/24 SAE C, 14 teeth, 4 splined 12/24 SAE CC, 17 teeth 5 keyed, ISO 3019-2 G38M
T7DDB 1 keyed SAE C, 2 keyed SAE CC, 3 splined SAE C, 14 teeth, 4 splined SAE CC, 17 teeth 5 keyed, ISO 3019-2 G38M
T7EDB 2 keyed SAE D and E, 3 splined SAE D and E, 13 teeth 1 keyed, ISO 3019-2 G45N
T7EEC 4 splined SAE D and E, 13 teeth 2 keyed, ISO 3019-2 G45N

On the four D builds code 5 belongs to both versions, so the same keyed shaft can be ordered either way. On the two E builds the ISO shaft and the SAE shafts are separate codes and cannot be carried across: the T7EDB uses 1 where the T7EDBS uses 2 or 3, and the T7EEC uses 2 where the T7EECS uses 4.

Rotation and the porting combination

Rotation is given as seen from the shaft end, R clockwise and L counter-clockwise. The porting combination sets how the three port sets sit relative to each other and to the mounting flange, and 00 is the standard arrangement.

Design letter and seal classes

The design letter is A across the six builds. Three seal classes are offered: 1, S1 in BUNA N, rated to 0.7 bar and intended for mineral oil; 4, S4 in EPDM, and 5, S5 in VITON, both rated to 7 bar and intended for mineral oil and fire-resistant fluids.

Port forms

Port sizes are fixed by the model and only the rear size is chosen in the code. The metric codes are M0 for the 1 in rear port and M1 for 3/4 in, the UNC codes 00 and 01 in the same order.

Model P1 P2 P3 Suction
T7DBB 1.1/4 in 1 in 1 in or 3/4 in 4 in
T7DCB 1.1/4 in 1 in 1 in or 3/4 in 4 in
T7DCC 1.1/4 in 1 in 1 in or 3/4 in 4 in
T7DDB 1.1/4 in 1.1/4 in 1 in or 3/4 in 4 in
T7EDB 1.1/2 in 1.1/4 in 1 in or 3/4 in 4 in
T7EEC 1.1/2 in 1.1/2 in 1 in or 3/4 in 4 in

What to confirm before ordering

  • Which of the six builds. The sections decide it: D + B + B, D + C + B, D + C + C, D + D + B, E + D + B or E + E + C.
  • ISO or SAE. The S changes the flange and, on the E builds, the whole shaft code.
  • All three cartridge codes, each read against the group for its position.
  • The rear port size, the only port dimension the code changes.

Ordering

Send the complete string from the nameplate, with all three cartridge codes in order and the shaft code. Where the plate is worn, photographs of the mounting flange and the shaft end identify the build before anything is shipped.

the T7EEC and T7EECS range · T7DBBS B28 B09 B12 2R00 A100 · T7DDB 050 B38 B10 5R00 A1M0. The T7 triple range shows what we list, and the cartridge kits and the T-series overview cover the rest of the family. Specific strings can go through the contact page.

Related

Subscribe to Updates

Enter your email below to receive our updates

Leave a Reply

Your email address will not be published. Required fields are marked *