The T7 triples put three sections on one shaft, and the range offers six builds: T7DBB, T7DCB, T7DCC, T7DDB, T7EDB and T7EEC. They draw on four cartridge groups, combined in different ways, and each build is available in two versions: the plain model on an ISO mounting flange and the same model with an S on an SAE flange.
Two of the six read one group at the front and share a second group across the two rear positions; the rest read three different groups. That is what decides which tables apply to a given string.
The six builds
| Model | Sections | ISO version flange | SAE version flange | Weight |
|---|---|---|---|---|
| T7DBB / T7DBBS | D + B + B | 125-A2-HW or 125-B4-HW, 6 bolts | SAE C, 6 bolts | 61 kg |
| T7DCB / T7DCBS | D + C + B | 125-A2-HW or 125-B4-HW, 6 bolts | SAE C, 6 bolts | 61 kg |
| T7DCC / T7DCCS | D + C + C | 125-A2-HW or 125-B4-HW, 6 bolts | SAE C, 6 bolts | 61 kg |
| T7DDB / T7DDBS | D + D + B | 125-A2-HW or 125-B4-HW, 6 bolts | SAE C, 6 bolts | 66 kg |
| T7EDB / T7EDBS | E + D + B | 250-B4-HW, 4 bolts | SAE E, 4 bolts | 102 kg |
| T7EEC / T7EECS | E + E + C | 250-B4-HW, 4 bolts | SAE E, 4 bolts | 114.8 kg |
Which group each position reads
| Model | Front P1 | Middle P2 | Rear P3 |
|---|---|---|---|
| T7DBB | D group | B group, shared with P3 | B group, shared with P2 |
| T7DCB | D group | C group | B group |
| T7DCC | D group | C group, shared with P3 | C group, shared with P2 |
| T7DDB | D group, shared with P2 | D group, shared with P1 | B group |
| T7EDB | E group | D group | B group |
| T7EEC | E group, shared with P2 | E group, shared with P1 | C group |
The D and B group lists
Displacements are in ml/rev. The D group is the twelve-code list used at the front position of the four D builds and at both front positions of the T7DDB; the B group is the thirteen-code list used at the rear of the three B builds.
| D code | ml/rev | B code | ml/rev |
|---|---|---|---|
| B14 | 44.0 | B02 | 5.8 |
| B17 | 55.0 | B03 | 9.8 |
| B20 | 66.0 | B04 | 12.8 |
| B22 | 70.3 | B05 | 15.9 |
| B24 | 81.1 | B06 | 19.8 |
| B28 | 90.0 | B07 | 22.5 |
| B31 | 99.2 | B08 | 24.9 |
| B35 | 113.4 | B09 | 28.0 |
| B38 | 120.6 | B10 | 31.8 |
| B42 | 137.5 | B11 | 35.0 |
| B45 | 145.7 | B12 | 41.0 |
| B50 | 158.0 | B14 | 45.0 |
| B15 | 50.0 |
The C and E group lists
The C group covers the middle position of the T7DCB, both rear positions of the T7DCC and the rear of the T7EEC. The E group is the ten-code list at the front of the T7EDB and across the two front positions of the T7EEC.
| C code | ml/rev | E code | ml/rev |
|---|---|---|---|
| B03 | 10.8 | 042 | 132.3 |
| B05 | 17.2 | 045 | 142.4 |
| B06 | 21.3 | 050 | 158.5 |
| B08 | 26.4 | 052 | 164.8 |
| B10 | 34.1 | 054 | 171.0 |
| B12 | 37.1 | 057 | 183.3 |
| B14 | 46.0 | 062 | 196.7 |
| B17 | 58.3 | 066 | 213.3 |
| B20 | 63.8 | 072 | 227.1 |
| B22 | 70.3 | 085 | 268.7 |
| B25 | 79.3 | ||
| B28 | 88.8 | ||
| B31 | 100.0 |
The string, field by field
The T7DDB example reads T7DDB or T7DDBS - B50 - B22 - B12 - 1 R 00 - A 1 - M0 - ... The four D builds and the two E builds share the same field order.
| Field | Function | Values |
|---|---|---|
| 1 | Series and flange | Six models; S added for the SAE flange version |
| 2 | Front cartridge P1 | D group on the four D builds, E group on the two E builds |
| 3 | Middle cartridge P2 | Per the table above; some builds share it with P1 or P3 |
| 4 | Rear cartridge P3 | Per the table above |
| 5 | Shaft | Depends on the version; see the shaft table |
| 6 | Rotation, seen from the shaft end | R clockwise, L counter-clockwise |
| 7 | Porting combination | 00 is standard |
| 8 | Design letter | A across the six builds |
| 9 | Seal class | 1, 4 or 5 |
| 10 | Port form and thread | Sizes fixed per model; the rear size is chosen here |
| 11 | Modification | Left blank on standard builds |
Shaft codes: where the S version differs
| Model | SAE version | Codes shared by both versions |
|---|---|---|
| T7DBB / T7DCB / T7DCC | 1 keyed outside SAE, 2 keyed SAE CC, 3 splined 12/24 SAE C, 14 teeth, 4 splined 12/24 SAE CC, 17 teeth |
5 keyed, ISO 3019-2 G38M |
| T7DDB | 1 keyed SAE C, 2 keyed SAE CC, 3 splined SAE C, 14 teeth, 4 splined SAE CC, 17 teeth |
5 keyed, ISO 3019-2 G38M |
| T7EDB | 2 keyed SAE D and E, 3 splined SAE D and E, 13 teeth |
1 keyed, ISO 3019-2 G45N |
| T7EEC | 4 splined SAE D and E, 13 teeth |
2 keyed, ISO 3019-2 G45N |
On the four D builds code 5 belongs to both versions, so the same keyed shaft can be ordered either way. On the two E builds the ISO shaft and the SAE shafts are separate codes and cannot be carried across: the T7EDB uses 1 where the T7EDBS uses 2 or 3, and the T7EEC uses 2 where the T7EECS uses 4.
Rotation and the porting combination
Rotation is given as seen from the shaft end, R clockwise and L counter-clockwise. The porting combination sets how the three port sets sit relative to each other and to the mounting flange, and 00 is the standard arrangement.
Design letter and seal classes
The design letter is A across the six builds. Three seal classes are offered: 1, S1 in BUNA N, rated to 0.7 bar and intended for mineral oil; 4, S4 in EPDM, and 5, S5 in VITON, both rated to 7 bar and intended for mineral oil and fire-resistant fluids.
Port forms
Port sizes are fixed by the model and only the rear size is chosen in the code. The metric codes are M0 for the 1 in rear port and M1 for 3/4 in, the UNC codes 00 and 01 in the same order.
| Model | P1 | P2 | P3 | Suction |
|---|---|---|---|---|
| T7DBB | 1.1/4 in | 1 in | 1 in or 3/4 in | 4 in |
| T7DCB | 1.1/4 in | 1 in | 1 in or 3/4 in | 4 in |
| T7DCC | 1.1/4 in | 1 in | 1 in or 3/4 in | 4 in |
| T7DDB | 1.1/4 in | 1.1/4 in | 1 in or 3/4 in | 4 in |
| T7EDB | 1.1/2 in | 1.1/4 in | 1 in or 3/4 in | 4 in |
| T7EEC | 1.1/2 in | 1.1/2 in | 1 in or 3/4 in | 4 in |
What to confirm before ordering
- Which of the six builds. The sections decide it: D + B + B, D + C + B, D + C + C, D + D + B, E + D + B or E + E + C.
- ISO or SAE. The S changes the flange and, on the E builds, the whole shaft code.
- All three cartridge codes, each read against the group for its position.
- The rear port size, the only port dimension the code changes.
Ordering
Send the complete string from the nameplate, with all three cartridge codes in order and the shaft code. Where the plate is worn, photographs of the mounting flange and the shaft end identify the build before anything is shipped.
the T7EEC and T7EECS range · T7DBBS B28 B09 B12 2R00 A100 · T7DDB 050 B38 B10 5R00 A1M0. The T7 triple range shows what we list, and the cartridge kits and the T-series overview cover the rest of the family. Specific strings can go through the contact page.
Related
- T6 Mobile Triples: T6DCCM, T6EDCM and T6EDCS, Three Sections in One Code
- T6 Through-Drive Triples: T6DCCR and T6EDCR, Three Sections Plus an Auxiliary Pump
- T6 Triple Vane Pumps: T6DCC and T6EDC, Three Sections in One Code
- T7 Double Vane Pumps: T7BB to T7EE, and What the S Decides
- T7 Single Vane Pumps: T7AS to T7ES, and What the S Decides
- T67 Double Vane Pumps: T67BB to T67EC, Cartridge Lists Position by Position
- T6 Double Vane Pumps: T6CC to T6EE in Eleven Code Positions
- T6GCC PTO Double Vane Pumps: Ten Code Fields, Two Cartridge Codes
- T6 Through-Drive Single Vane Pumps: Driving a Second Pump
- T6GC, T6ZC and T67GB: PTO Vane Pumps in Nine Code Positions

