Product overview
New aftermarket A10VSO axial piston variable pump, Series 52, swashplate design for open circuit. Complete model code: A10VSO10ED72/52R-PKC64N00T. Size NG10, nominal displacement 10.5 cm³/rev. Nominal pressure 250 bar, maximum pressure 315 bar. Direction of rotation R (clockwise, viewed on the drive shaft). Quality checked before shipping. Contact us to confirm exact configuration and availability before ordering.
Control: ED72 electrohydraulic pressure control, negative (24 V)
The ED valve is set to a certain pressure by a specified variable solenoid current. When the consumer (load pressure) changes, this causes an increase or decrease in the pump swivel angle (flow) in order to maintain the electrically set pressure level. The pump thus only delivers as much hydraulic fluid as the consumers can take. The desired pressure level can be set steplessly by varying the solenoid current. As the solenoid current signal drops towards zero, the pressure will be limited to pmax by an adjustable hydraulic pressure cut-off (secure fail-safe function in case of power failure, e.g. for fan speed control).
- Negative control: U = 24 V (ED72). Hysteresis: maximum 25 bar.
Other control options on this size
This 10.5 cm³ Series 52 pump is also available with other controls:
- A10VSO10DR/52R-PSC64N00 — DR pressure controller
- A10VSO10DRG/52R-PSC64N00 — DRG pressure controller, remotely controlled
- A10VSO10DFR/52R-PSC64N00 — DFR pressure and flow controller (load-sensing)
- A10VSO10DFR1/52R-PSC64N00 — DFR1 pressure and flow controller (load-sensing, with flushing)
Ordering
Send us the complete model code from the nameplate of your existing pump, or the machine model — we will confirm the correct size, control and configuration before you order.
Reviews
There are no reviews yet.