Product overview
New aftermarket A4VSO125DFE1/30R-PPB13N00-S1340 axial piston pump. Swashplate-type variable displacement pump for open circuit, from the A4VSO Series 30 family. Size NG125, geometric displacement 125 cm³/rev.
Nominal pressure 350 bar, peak pressure 400 bar. Rated speed 1800 rpm (maximum 2200 rpm) at Vg max; flow approx. 225 L/min at the rated speed; drive power approx. 131 kW and torque approx. 696 Nm at Δp 350 bar; mass approx. 88 kg. Swashplate design for industrial open circuits, low noise level and short response times.
Supply is as a new aftermarket replacement unit, quality checked before shipping. Because the full model code defines mounting, seals, shaft and ports, please send us your complete nameplate code before ordering and we will confirm the exact configuration.
Control: DFE1 electro-hydraulic control (P/Q)
Electro-proportional valve controls power, pressure and swivel angle; current sets the swashplate angle and therefore the flow. On power failure or depressurisation the spring returns the pump to Vg max.
Technical data
| Size (NG) | NG125 — displacement 125 cm³/rev |
| Pressure | up to 350 bar nominal, 400 bar peak |
| Speed | 1800 rpm rated / 2200 rpm max at Vg max |
| Flow at rated speed | 225 L/min |
| Drive power / torque at Δp 350 bar | 131 kW / 696 Nm |
| Rotation | clockwise (viewed from the drive shaft end) |
| Seal material | NBR seals with PTFE shaft seal (HFA/HFB/HFC) |
| Drive shaft | straight keyed shaft to DIN 6885 |
| Mounting flange | ISO 3019-2 metric 4-hole mounting flange (NG40-500) |
| Working ports | standard working ports (SAE flange, metric fasteners) |
| Through-drive / filter | no through-drive (N00) |
| Mass (without through-drive) | 88 kg |
Model code — A4VSO125DFE1/30R-PPB13N00-S1340
| A4VSO | swashplate-type variable pump, open circuit, Series 30 |
| NG125 | nominal size 125 — displacement 125 cm³/rev |
| DFE1 | DFE1 electro-hydraulic control (P/Q) |
| 30 | design series 30 |
| R | clockwise (viewed from the drive shaft end) |
| P | NBR seals with PTFE shaft seal (HFA/HFB/HFC) |
| P | straight keyed shaft to DIN 6885 |
| B | ISO 3019-2 metric 4-hole mounting flange (NG40-500) |
| 13 | standard working ports (SAE flange, metric fasteners) |
| N00 | no through-drive flange |
Other sizes
Other A4VSO sizes and controls are available on request — sizes NG40 to NG1000 and controls such as DR, DFR, LR, MA, EM, HS and DFE1. Send us your requirements.
Related
Series overview: A4VSO Piston Pump. All axial piston pumps: Piston Pumps. Not sure about the fit? Contact us with the complete nameplate code and we will confirm before you order.
Reviews
There are no reviews yet.