Product overview
New aftermarket A10VO axial piston variable pump, Series 52, swashplate design for open circuit. Complete model code: A10VO60DRG/52R-PSD62K68. Size NG60, nominal displacement 60 cm³/rev. Nominal pressure 250 bar, maximum pressure 315 bar. Direction of rotation R (clockwise, viewed on the drive shaft). Quality checked before shipping. Contact us to confirm exact configuration and availability before ordering.
Control: DRG pressure controller, remotely controlled
For the remotely controlled pressure controller, the LS pressure relief is performed using a separately arranged pressure relief valve. Therefore, any pressure control value under the pressure set on the pressure controller can be regulated. A pressure relief valve is externally piped up to port X for remote control; this relief valve is not included in the scope of delivery of the DRG control.
- Basic position in depressurized state: Vg max.
- Setting range for pressure control: 35 to 250 bar — standard is 250 bar.
- Setting range for differential pressure: 14 to 22 bar — standard is 20 bar (at 20 bar Δp the quantity of control fluid at port X is approx. 1.5 l/min).
- Unloading port X to the reservoir results in a zero stroke (standby) pressure approx. 1 to 2 bar higher than the defined differential pressure Δp.
Other control options on this size
This 60 cm³ Series 52 pump is also available with other controls:
- A10VSO60DR/52R-VSC62N00 — DR pressure controller
- A10VSO60DFR/52R-VSC62N00 — DFR pressure and flow controller (load-sensing)
- A10VSO60DFR1/52R-VSC12N00 — DFR1 pressure and flow controller (load-sensing, with flushing)
- A10VSO60DRSC/52R-PSD12K04-S — DRSC pressure and flow controller, without flushing
Ordering
Send us the complete model code from the nameplate of your existing pump, or the machine model — we will confirm the correct size, control and configuration before you order.
Reviews
There are no reviews yet.