Model code — A10VO28ED72/53R-VSC12N00P
Decoded against the official ordering code of this series (series 53 uses 12 positions, in the order of positions 02–13 of series 31). This unit reads as follows:
| Field | Value | Meaning |
|---|---|---|
| Axial piston unit | A10VO | A10VO swashplate variable pump (open circuit) |
| Size (NG) | 28 | nominal size NG28 |
| Control | ED72 | electro-hydraulic pressure control |
| Series | 53 | series 53 |
| Rotation | R | clockwise, viewed from the shaft end |
| Seals | V | FKM fluoroelastomer (modern standard) |
| Drive shaft | S | spline, ISO 3019-1 / ANSI B92.1a |
| Mounting flange | C | SAE 2-hole (standard) |
| Work ports | 12 | metric flange seat, fixed metric threads (DIN 13) |
| Through drive | N00 | no through drive |
| Solenoid connector | P | with solenoid connector |
Product overview
New aftermarket A10VO axial piston variable pump, Series 53, swashplate design for open circuit. Complete model code: A10VO28ED72/53R-VSC12N00P. Size NG28, nominal displacement 28 cm³/rev. Nominal pressure 250 bar, maximum pressure 315 bar. Direction of rotation R (clockwise, viewed on the drive shaft). Quality checked before shipping. Contact us to confirm exact configuration and availability before ordering.
Control: ED72 electrohydraulic pressure control, negative (24 V)
The ED valve is set to a certain pressure by a specified variable solenoid current. When the consumer (load pressure) changes, this causes an increase or decrease in the pump swivel angle (flow) in order to maintain the electrically set pressure level. The pump thus only delivers as much hydraulic fluid as the consumers can take. The desired pressure level can be set steplessly by varying the solenoid current. As the solenoid current signal drops towards zero, the pressure will be limited to pmax by an adjustable hydraulic pressure cut-off (secure fail-safe function in case of power failure, e.g. for fan speed control).
- Negative control: U = 24 V (ED72). Hysteresis: maximum 25 bar.
Other control options on this size
This 28 cm³ Series 53 pump is also available with other controls:
- A10VO28DRS/53R-VSC12K01-S — DRS pressure and flow controller (load-sensing, with flushing)
- A10VO28LA6DS/53R-VSC11N00 — LA6DS pressure, flow and power controller (power limiter)
- A10VO28LA7DS/53R-VSC12N00-S — LA7DS pressure, flow and power controller (power limiter)
- A10VO28EK1DS/53R-VSC12N00P — EK1DS electro-proportional control with controller cut-off
Ordering
Send us the complete model code from the nameplate of your existing pump, or the machine model — we will confirm the correct size, control and configuration before you order.
Other models in this series
Other A10VO Series 53 models we stock:
- A10VO100DRS/53R-VSC12K68 — DRS pressure and flow control (load sensing, X-T plugged)
- A10VO18DRS/53R-VSC11N00-S — DRS pressure and flow control (load sensing, X-T plugged)
- A10VO28DRS/53R-VSC12K01-S — DRS pressure and flow control (load sensing, X-T plugged)
- A10VO45DRS/53R-VSC11N00 — DRS pressure and flow control (load sensing, X-T plugged)
- A10VO63DRS/53R-PSC12N00-SO854 — DRS pressure and flow control (load sensing, X-T plugged)
Not sure about the fit? Contact us with the full nameplate code and we will confirm before you order.
Reviews
There are no reviews yet.