New Aftermarket A10VO18EK2DF/53R-VSE12N00P Axial Piston Pump

Product overview

New aftermarket A10VO axial piston variable pump, Series 53, swashplate design for open circuit. Complete model code: A10VO18EK2DF/53R-VSE12N00P. Size NG18, nominal displacement 18 cm³/rev. Nominal pressure 250 bar, maximum pressure 315 bar. Direction of rotation R (clockwise, viewed on the drive shaft). Quality checked before shipping. Contact us to confirm exact configuration and availability before ordering.

Control: EK2DF electro-proportional control with controller cut-off

The EK variant is based completely on the EP variant. In addition to the electro-proportional control function, a controller cut-off is integrated in the electric characteristic curve: the pump swivels to Vg max if the pilot signal is lost (e.g. cable break), then working with the DRF settings if necessary. The controller cut-off is only intended for short-term use. A PWM signal is used to control the solenoid. A minimum working pressure of 50 bar is needed for safe and reproducible control; at lower pressures a pilot signal above 500 mA (EK2) or 1000 mA (EK1) is required to avoid undesired cut-off.

• Voltage: EK1 = 12 V (±20%), EK2 = 24 V (±20%).

Other control options on this size

This 18 cm³ Series 53 pump is also available with other controls:

• A10VO18DR/53R-PPC11N00-S — DR pressure controller
• A10VO18DRG/53R-VPC12N00 — DRG pressure controller, remotely controlled
• A10VO18DRF/53R-VPC12N00 — DRF pressure and flow controller (load-sensing)
• A10VO18DRS/53R-VSC11N00 — DRS pressure and flow controller (load-sensing, with flushing)

Ordering

Send us the complete model code from the nameplate of your existing pump, or the machine model — we will confirm the correct size, control and configuration before you order.