Model code — A10VSO100DRG/32R-VPB12N00
Decoded against the official ordering code of this series (series 32 uses 12 positions, in the order of positions 02–13 of series 31). This unit reads as follows:
| Field | Value | Meaning |
|---|---|---|
| Axial piston unit | A10VO | A10VO swashplate variable pump (open circuit) |
| Size (NG) | 100 | nominal size NG100 |
| Control | DRG | pressure control with remote adjustment |
| Series | 32 | series 32 |
| Rotation | R | clockwise, viewed from the shaft end |
| Seals | V | FKM fluoroelastomer (modern standard) |
| Drive shaft | P | straight key, DIN 6885 (metric / US version) |
| Mounting flange | B | ISO 3019-2 metric 4-hole |
| Work ports | 12 | metric flange seat, fixed metric threads (DIN 13) |
| Through drive | N00 | no through drive |
| Solenoid connector | — | omitted — none |
Product overview
New aftermarket A10VSO axial piston variable pump, Series 32, swashplate design for open circuit. Complete model code: A10VSO100DRG/32R-VPB12N00. Size NG100, nominal displacement 100 cm³/rev. Nominal pressure 280 bar, maximum pressure 350 bar. Direction of rotation R (clockwise, viewed on the drive shaft). Quality checked before shipping. Contact us to confirm exact configuration and availability before ordering.
Control: DRG pressure controller, remotely controlled
For the remotely controlled pressure controller, the LS pressure limitation is performed using a separately arranged pressure relief valve. Therefore any pressure control value under the pressure set on the pressure controller can be regulated. A pressure relief valve is externally piped up to port X for remote control; this relief valve is not included in the scope of delivery of the DRG control.
- Basic position in depressurized state: Vg max.
- Setting range for pressure control: 20 to 280 bar — standard 280 bar.
- Setting range for differential pressure: 10 to 22 bar — standard 20 bar (a standard setting of 20 bar Δp results in a pilot oil flow of approx. 1.5 l/min at port X).
- As a separate pressure relief valve we recommend a direct operated, hydraulic or electric proportional one; the maximum line length should not exceed 2 m.
- Unloading port X to the reservoir results in a zero stroke (standby) pressure which is approx. 1 to 2 bar higher than the defined differential pressure Δp.
Other control options on this size
This 100 cm³ Series 32 pump is also available with other controls:
- A10VSO100DR/32R-VPB12N00 — DR pressure controller
- A10VSO100DRF/32R-VPB32U99 — DRF pressure flow controller
- A10VSO100DRS/32R-VPB12N00 — DRS pressure flow controller
- A10VSO100DG/32R-VSD72U00E — DG two-point control, direct operated
Ordering
Send us the complete model code from the nameplate of your existing pump, or the machine model — we will confirm the correct size, control and configuration before you order.
Reviews
There are no reviews yet.