Aftermarket Replacement T6 Triple Vane Pumps

T6 Triple Vane Pumps

Triple pumps with the T6 cartridge system (sizes C / D / E). Displacement 10.8 – 268.7 cm³/r; pressure up to 300 bar intermittent / 275 bar continuous (C cartridges); 240 / 210 bar (D and E cartridges). Industrial versions run at 600 – 2200 r/min; the larger section has to sit at the shaft end. Standard, mobile (M / P), through-drive (R / RM) and PTO versions are available. Cartridges and shaft are independent, so cartridges can be changed on site without stripping the pump. All units are new aftermarket replacements, quality checked before shipping; send us the complete code from the nameplate and we will confirm the configuration.

Models in this group

ModelSectionsP1 / P2 / P3 groupsShaft codesMass
T6DCCD + C + CD / C (shared with P3) / C1 / 2 / 3 / 461.0 kg
T6EDCE + D + CE / D / C1 (only)100.0 kg
FlangeT6DDCS uses an SAE C 6-bolt flange (J744c). For T6DCC and T6EDC, send us the code stamped on the nameplate and we match the flange before shipping.
T6DDC / T6DDCST6DDCS (D + D + C, SAE C 6-bolt J744c, 66 kg) and T6DDC belong to the same family - ask us about availability for either of them
Pressure & speedRated pressure and speed depend on the section groups built into your pump - send us the full nameplate code and we confirm the figures per section

Need the exact family code or version (standard / mobile M·P / through-drive R·RM / PTO) confirmed? Contact us with the complete nameplate code.

T6 triple vane pumps – three T6 cartridge sections (C / D / E) on one shaft for multi-circuit machines; the larger section sits at the shaft end.

T6 Triple Vane Pumps

T6 triple vane pumps – three T6 cartridge sections (C / D / E) on one shaft for multi-circuit machines; the larger section sits at the shaft end.

Showing all 16 results