T6 Single Vane Pumps: T6C, T6D and T6E in Eight Code Positions
Three sizes, one eight-position string A T6 single pump is a fixed-displacement vane pump built from one cartridge: a rotor and vanes…
3525VQT to 4525VQT Through-Drive Double Vane Pumps: Two Sections, Three Flows
Two flows in the housing, a third off the back This double does not stop at two flows. A shaft-end section and…
25VQT to 45VQT Through-Drive Vane Pumps: Fourteen Positions, Two Rear Letters
Front half VQ, rear half its own positions A VQT drives a second pump from the tail shaft, and it does so…
50V Vane Pumps: The Nameplate Reads in USgpm
Why the capacity position is a flow, not a displacement Most vane pumps are chosen by displacement in cm³ The 50V is…
25VT to 45VT Through-Drive Vane Pumps: Driving a Second Pump
One motor, two pumps A VT is the V series single pump prepared for a rear drive: the back cover takes an…
VQSV10 Triple Vane Pumps: Three Sections, Three Outlets, One Code
Three sections, three outlets Three independent circuits from one drive point is what this pump is for. The double section feeds outlets…
2520VQ to 4535VQ Double Vane Pumps: One Code Position, Two Displacement Tables
One code, two displacement tables A VQ double names its two sections with the same displacement codes the VQ single uses, but…
2520V to 4535V Double Vane Pumps: How the Two Section Sizes Are Named
The name is the two section sizes Before any code reading, the model name already says what the pump is: 2520V is…
20VQ to 45VQ Single Vane Pumps: Two Code Lengths, One Pressure Rule
Ten positions, or twelve Most VQ single pumps are ordered through ten positions; the 20VQ — the mobile build — uses twelve.…
20V to 45V Single Vane Pumps: The Pressure Rating Hides in the Displacement Code
Pressure follows the displacement code Two pumps with the same frame letter can carry different pressure ratings, because on this series the…
Legacy V10 and V20 Vane Pumps: Why the Old Code Has 15 Positions
The V10 and V20 platforms have been built for decades, and the pumps from the earlier generation use a different order code…
V2010 and V2020 Double Vane Pumps: One Code, Two Sections
How a V2010 or V2020 double pump is ordered with one 13-position code: both ring sizes, the mounting code that reads the opposite way round, the two-letter outlet position and the design number. Includes the published ring combinations and the mistakes that most often send the wrong pump.
