Model code — A10VSO10ED71/52R-PSC64N00T
Decoded against the official ordering code of this series (series 52 uses 12 positions, in the order of positions 02–13 of series 31). This unit reads as follows:
| Field | Value | Meaning |
|---|---|---|
| Axial piston unit | A10VO | A10VO swashplate variable pump (open circuit) |
| Size (NG) | 10 | nominal size NG10 |
| Control | ED71 | electro-hydraulic pressure control |
| Series | 52 | series 52 |
| Rotation | R | clockwise, viewed from the shaft end |
| Seals | P | NBR body with FKM shaft seal (older / US version) |
| Drive shaft | S | spline, ISO 3019-1 / ANSI B92.1a |
| Mounting flange | C | SAE 2-hole (standard) |
| Work ports | 64 | flange seat (NG10 / 28 / 45) |
| Through drive | N00 | no through drive |
| Solenoid connector | — | omitted — none |
| Additional code | T | special version / customer code — not detailed per case in the reference; we confirm it against the order |
Product overview
New aftermarket A10VSO axial piston variable pump, Series 52, swashplate design for open circuit. Complete model code: A10VSO10ED71/52R-PSC64N00T. Size NG10, nominal displacement 10.5 cm³/rev. Nominal pressure 250 bar, maximum pressure 315 bar. Direction of rotation R (clockwise, viewed on the drive shaft). Quality checked before shipping. Contact us to confirm exact configuration and availability before ordering.
Control: ED71 electrohydraulic pressure control, negative (12 V)
The ED valve is set to a certain pressure by a specified variable solenoid current. When the consumer (load pressure) changes, this causes an increase or decrease in the pump swivel angle (flow) in order to maintain the electrically set pressure level. The pump thus only delivers as much hydraulic fluid as the consumers can take. The desired pressure level can be set steplessly by varying the solenoid current. As the solenoid current signal drops towards zero, the pressure will be limited to pmax by an adjustable hydraulic pressure cut-off (secure fail-safe function in case of power failure, e.g. for fan speed control).
- Negative control: U = 12 V (ED71). Hysteresis: maximum 25 bar.
Other control options on this size
This 10.5 cm³ Series 52 pump is also available with other controls:
- A10VSO10DR/52R-PSC64N00 — DR pressure controller
- A10VSO10DRG/52R-PSC64N00 — DRG pressure controller, remotely controlled
- A10VSO10DFR/52R-PSC64N00 — DFR pressure and flow controller (load-sensing)
- A10VSO10DFR1/52R-PSC64N00 — DFR1 pressure and flow controller (load-sensing, with flushing)
Ordering
Send us the complete model code from the nameplate of your existing pump, or the machine model — we will confirm the correct size, control and configuration before you order.
Series overview
All models in this series: A10VO Series 52. Parent range: A10VO Piston Pump.
Not sure about the fit? Contact us with the full nameplate code and we will confirm before you order.
Reviews
There are no reviews yet.