Product overview
New aftermarket A2FM80/61W-VAB010 — an axial piston fixed motor of the A2FM series 6x, bent-axis design, fixed displacement, bi-directional (W rotation), for open and closed circuits. Typical duty is wheel-excavator travel, crane winches and closed-circuit fan drives, where a fixed motor holds speed under load. All units are new replacements, quality checked before shipping.
Specifications
| Series | A2FM 6x — bent-axis fixed motor |
| Displacement | fixed, 80.4 cm³/rev (NG80) |
| Circuit | open and closed |
| Max pressure (nominal / peak) | 400 / 450 bar |
| Shaft | Code A — splined, SAE |
| Mounting flange | Code B — 4-bolt |
| Working ports | Code 010 — SAE flange, ports at the rear, no valve |
| Rotation | Code W — bi-directional |
| Seal | V — FKM |
Model code — A2FM80/61W-VAB010
| 1 Fluid | omitted — mineral oil |
| 2 Unit | A2F |
| 3 Bearing | standard |
| 4 Mode | M — motor |
| 5 Size | 80 — 80.4 cm³/rev |
| 6 Series | 6 — series 6x |
| 7 Index | 1 — design index |
| 8 Rotation | W — bi-directional |
| 9 Seal | V — FKM |
| 10 Shaft | A — splined, SAE |
| 11 Flange | B — 4-bolt |
| 12 Ports | 010 — SAE flange, ports at the rear, no valve |
| 13 Speed sensor | omitted |
| 14 Special version | omitted |
| 15 Version | omitted |
Before you order
- Code, not just displacement — the same NG size comes with different shafts and port plates.
- Shaft and flange — these decide whether the motor fits the existing coupling and mounting pad.
- Port plate and valves — check whether the machine needs a flushing valve or a counterbalance valve face.
Selection & ordering
Send us the complete code from the nameplate (or the machine model) and we confirm the fit before your order ships.
Related parts & pages
Other models in this range
Related categories — A2FM Fixed Piston Motors · Piston Motors · Piston Pumps
Not sure about the fit? Send us the full code from the nameplate and contact us — we confirm before your order ships.









Reviews
There are no reviews yet.