New Aftermarket 2520VQ12A12 1CC20 Double Vane Pump

Product overview

New aftermarket 2520VQ12A12 1CC20 — a 2520VQ double vane pump: two cartridge sections on one shaft, one inlet and two independent outlets, so two circuits can run at different pressures and flows. The model number is decoded item by item below.

Model code — 2520VQ12A12 1CC20

The model code fixes every mechanical interface of the pump. This unit reads as follows, using the position numbers of the model-code system:

Position	Value	Meaning
1 Seals	—	omitted — standard seals
2 Series	2520VQ	double pump: 25V shaft-end with 20V cover-end (first pair = shaft-end size, second pair = cover-end size)
3 Pilot	—	omitted — standard pilot
4 Shaft-end displacement	12	12 = 40.2 cm³/r
5 Port	A	SAE 4-bolt flange, inlet and both outlets
6 Cover-end displacement	12	12 = 39.5 cm³/r
7 Mounting / shaft seal	—	omitted — flange mounting with single shaft seal
8 Shaft	1	keyed shaft
9 Port orientation	CC	viewed from the cover end — outlet 1 in line with the inlet; outlet 2 in line with the inlet
10 Design	20	design number of this series
11 Rotation	—	right-hand (clockwise)

Ordering

Send us the complete model number from your nameplate and we will confirm this pump matches before you order. Port flange kits are ordered separately.

Other models in this series

More VQ Double Vane Pumps models we stock (2520VQ frame first):

• 2520VQ12A12 11CC20 PUMP
• 2520VQ
• 2520VQ12A11 11DD20
• 2520VQ12A14 11BC20 LH
• 2520VQ12A8 11CB 20
• 2520VQ12A5 11AA20

Series overview

Series page: VQ Double Vane Pumps. Parent range: V / VQ Double Vane Pumps · Family: V · VQ · 50V Series.

Cartridges and kits for this pump: V / VQ Cartridge Kits — the cartridge is interchangeable within the same position in the housing, so the original housing and shaft stay on the machine.

Not sure about the fit? Contact us with the full nameplate code and we will confirm before you order.