New Aftermarket A10VNO45ED72/52L-VSC11N00P-S4672 Axial Piston Pump

Product overview

New aftermarket A10VNO axial piston variable pump, Series 52, swashplate design for open circuit. Complete model code: A10VNO45ED72/52L-VSC11N00P-S4672. Size NG45, nominal displacement 45 cm³/rev. Nominal pressure 210 bar, maximum pressure 250 bar. Direction of rotation L (counter-clockwise, viewed on the drive shaft). Quality checked before shipping. Contact us to confirm exact configuration and availability before ordering.

Control: ED72 electrohydraulic pressure control, negative control (24 V)

The ED valve sets a certain pressure according to a specified variable solenoid current; as the load pressure changes, the pump swivel angle (flow) is adjusted to maintain the electrically set pressure level. The desired pressure level can be set steplessly by varying the solenoid current. If the current signal drops towards zero, the pressure is limited to pmax by the adjustable hydraulic pressure cut-off (fail-safe in case of power loss).

• Negative control: U = 24 V (ED72). Hysteresis: maximum 25 bar.

Other control options on this size

This 45 cm³ Series 52 pump is also available with other controls:

• A10VNO45DRF/52R-VRC12K01 — DRF pressure and flow controller (load-sensing, X-T open)
• A10VNO45DFR/52R-VRC07N00-S — DFR pressure and flow controller (load-sensing, X-T open)
• A10VNO45DRS/52L-VCC07K01ES — DRS pressure and flow controller (load-sensing, X-T plugged, with flushing)
• A10VNO45DFR1/52L-HTC40N00-S — DFR1 pressure and flow controller (load-sensing, X-T plugged, with flushing)

Ordering

Send us the complete model code from the nameplate of your existing pump, or the machine model — we will confirm the correct size, control and configuration before you order.