Series and how to order — 20V
This item is a cartridge / cartridge kit, not a complete pump: it is listed by the pump series it fits (above) rather than by a single pump model code. Send the complete model code of the pump on your machine — or a nameplate photograph — and we confirm the correct cartridge and section position (front, middle or rear).
| Field |
|---|
| Seals |
| Series |
| Pilot |
| Displacement |
| Port |
| Port thread |
| Mounting |
| Shaft |
| Outlet position |
| Design number |
| Rotation |
| Special suffix |
Send us the full model code from the nameplate and we will confirm displacement, shaft, ports and rotation before you order.
There are varieties of displacement selections for this vane pump cartridge from 7,0 to 45,0 ml/rev. The max pressure can support up to 210 bar for the instance use case. Also, The rotation speed supports from 600 to 2700 r/min using the different oil types.This vane pump allows low flow at high pressure and high flow at lower pressure. A clever way to optimize your circuit design and to sustain consistency power and flow. This pump also provides fast pressure cycle change with a precise flow.
Here are links for Single Pump Cartridge kit:
Vane Pump Cartridge More Features & Benefits:
- Reduced energy consumption: Up to 90% Efficiency; reduces heat generation.
- Low noise level: Optimized for the lowest noise level in the smallest envelope.
- Increased lifetime: Double lip vane design raises dirt resistance to increase lifetime.
- Easy installation: Use the same body for all displacements. The port orientation allows customized installation.
Applications:
- Presses
- Lubrication
General Applications Instructions:
- Check speed range, pressure, temperature, fluid quality, fluid viscosity, and pump rotation.
- Check the inlet conditions of the pump, if it can accept the application requirements.
- Check the type of shaft: if it will support the operating torque.
- Check the coupling to cut pump shaft load (weight, misalignment).
- Filtration: must be adequate for the lowest contamination level.
- Check the environment of the pump: avoid noise reflection, pollution, and shocks.
Start-up :
- Fill the tank up with a clean fluid in proper conditions.
- We recommend flushing the system with an external pump before the start-up.
- It is important to bleed the air off the circuit & the pump itself.
- The first valve on the circuit should be open to the tank.
- We recommend the use of air bleed-off valves.It is possible to bleed off the air by creating a leak in the P port of the pump.
More:
- We stock replacement parts for our VQ and V series aftermarket line.
- We are expanding our product range, so please check back often for our new product offering.
- If you have special requests, feel free to contact us. By the way, we have a strong project team for customized requirements.
Other models in this series
More V / VQ Cartridge Kits models we stock (20V frame first):
Series overview
Series page: V / VQ Cartridge Kits. Family: V · VQ · 50V Series.
Not sure about the fit? Contact us with the full nameplate code and we will confirm before you order.
Reviews
There are no reviews yet.