V2010 double vane pumps
The V2010 is two fixed-displacement cartridge sections inside one housing (shaft-end section + cover-end section), sharing one shaft and one inlet, each section with its own outlet — for two independent circuits or combined flow. The shaft-end section is V20 class (ring sizes 6-13) and the cover-end section V10 class (ring sizes 1-7), with pressures up to 172 bar and a total weight of about 13.6 kg. All units are new aftermarket replacements, quality checked before shipping.
Technical data — V2010
| Ring | Shaft-end section | Cover-end section |
|---|---|---|
| Ring sizes | 6 / 7 / 8 / 9 / 11 / 12 / 13 | 1 / 2 / 3 / 4 / 5 / 6 / 7 |
| Displacement range | 19.5-42.4 cm³/r | 3.3-22.8 cm³/r |
| Max speed | 2400-3000 rpm | 2800-3000 rpm |
| Max pressure | 152-172 bar | 138-172 bar |
| Outlets | 1.062-12 UN-2B | .750-16 UN |
Selection notes
Inlet is an SAE 4-bolt flange (1.50 in port). Mounting code 1 = SAE B (4.00 in pilot). Ordering uses a single combined model code in which the shaft-end and cover-end sections occupy their own positions.
Ordering
The model code must be complete — ring size, mounting, inlet and outlet, shaft and rotation together define the pump. Send the full nameplate code and we will confirm the replacement.
Need the ring size, shaft or port confirmed? Send us the full model code from the nameplate and we will confirm before you order. Contact us
V2010 Double Vane Pump
V2010 double balanced vane pumps – two cartridge sections on one shaft (shaft end V20 class + cover end V10 class), two outlets, pressures up to 172 bar, total weight about 13.6 kg. New aftermarket replacements, quality checked before shipping.
